How to share Internet connection in Windows XP, 7 & 8

Here is how to share your Internet connection in a way that other computers to be able to use it.  Happy learning and be sure to check my Windows 10 course!

The popular way of doing this is by using a hardware router or a combination of a proxy server and a hub. In the following article, I'll show how to easily share your connection with the Windows integrated Internet Connection Sharing.
 The alternatives:
Hardware router
Pros: - once turned on the device provides an Internet connection.
Cons: - set up, price.

Hub
Pros: - price, allows proper connectivity and data transfer between several computers.
Cons: - doesn't support network address translation(NAT).
+
Proxy server
Pros: - emulates hardware router functionality and gives IP address and port to the clients to provide Internet connectivity.
Cons:
- every client needs to use the Proxy server address
- network connection protocols are not being fully supported

What you'll need:
- one additional network(LAN) card, which will act as an outgoing Internet device
- (optionally) hub, if you are willing to share your Internet with more than one computer
Note: if you are sharing internet connection over Wi-Fi making hotspot, you are just fine with one incoming network card connection!

Let's begin
Server setup
First off you'll have to know whether you've been using:
Dial-up type of connection (PPPoE) providing a username and password or you are directly connected to your provider(ADSL...) without having to enter username and password every time prior to using the Internet.

Windows XP

Open up Start->Settings->Network Connections to see your network cards(LAN). Important: If you are using ADSL find the incoming Internet connection card(i.e through which the Internet comes in) and right-click ->Properties
If you are using LAN + Dial-up find your Dial-up connection(and not the LAN card) and right-click -> Properties(fig. 1)


Fig 1. LAN + Dial-up

On the next screen check the Allow other network users to connect through this computer's Internet connection.

Then you'll be prompted to allow the ICS to change your second(inner) LAN card settings.
From now on it'll have IP 192.168.0.1 and will serve dynamic IP addresses via DCHP to the connected computers(clients).

Other computers setup(clients)
The only thing left to do is to go to Start->Settings->Network Connections, right-click on the network card Properties ->; Internet Protocol(TCP/IP) - then again on Properties.


...and check both as shown automatically


Don't forget to protect the shared connection
When all of your computers already have the Internet it is important to turn on the integrated Windows firewall:
from Start->Run->Firewall.cpl
and then check both: On(recommended) and Don't allow exceptions

Windows 7 & 8

The same procedure applies for these versions of Windows. So first go to Control Panel  -> Network and Internet -> Network and Sharing Center and click on Connections: Local Area Connection. Same can be achieved if you just right click on the network icon from the taskbar ->Properties




Then choose a network connection you want to share with other computers and click on its properties:

Finally from tab Sharing, click on 'Allow Other Network Users to Connect through This Computer’s Internet Connection checkbox.'

How to set up the clients:

they have to use automatic settings for IP and DNS settings.

Now you are ready. Happy surfing!!!

Remarks:
If your home LAN has IP addresses different than 192.168.0.х you'll have to change your DHCP server settings from here: http://support.microsoft.com/kb/230148