Herbal acne treatment

Herbal vinegar
Gently wash your skin and while still wet pour on it apple vinegar mixed with horse-radish. Leave it so for 10 minutes, then rinse with water. Repeat the procedure 2 times daily: in the morning and night.
How to prepare the herbal vinegar:
Add finely grated horse radish to apple cider. Pour the mixture in a bottle so that the vinegar should top up the herb. Leave the consistence for 10 days in a moderate temperature. Both ingredients complement each other into a beneficial for the skin essence.
Additionally if you want to achieve more effective results prior the procedure use a cotton ball with diluted salicylic acid to clear up the old skin.

Tea tree oil
First you need to do a herbal water vapor on the affected area. How? Put dry lavender in a preheated saucepan filled with water. The lavender has antibacterial effect. Bow before the water surface and stay up to 10 minutes. If it gets harder to do this grab a sponge and massage over the affected area. This is needed to clean up the pores. Next gently apply the tea tree oil.




Alternatively before going to sleep you can apply the following herbal mask:
mix thoroughly
2 tsp. of yogurt
4 drops of tee tree oil
1 tsp. of freshly squashed lemon juice
in the morning rinse with water.

General advice:
Drink 1 litter of tea prepared from the nettle leaves - continuously through the whole day. by Nevyan Neykov

---

The honey massage

Honey massage is type of soft tissue massage that has beneficial healing properties to the body. Besides water and carbohydrates, there are essential micro elements, minerals, enzymes and antibiotics. When eaten those beneficial nutrients are being partly destroyed by the hydrochloric stomach acid, but when applied to the skin they are fully absorbed.

Preparation
First make sure that you are not allergic to honey and try to get a liquid non-crystallized one from a local herbal shop.

Technique
Pour honey all over the area that will be massaged. Then try to “unglue” your hands from the area by palm clapping and rubbing motions. Continue until all the honey disappears. If you’ve been doing it right then white-gray skin pallets will form. This indicates that the years accumulated harmful toxins held under the skin are being removed effectively.
When you finish wash the skin with sponge and warm water. The healing effects can be felt immediately. Be warned that the skin will remain red for a short time right after the treatment and initially may hurt, but after a couple of sessions it will adapt. For effective cellulite removal you’ll need at least 15 such sessions.
Duration: 30 minutes to 90 minutes

Benefits:
- cleans moisturizes and nourishes the skin
- removes salts and toxins
- relaxes the nervous system
- improves blood circulation, metabolism
- increases the lymphatic system flow
- Anti-cellulite
- frees from intellectual and physical chronic exhaustion
- increases immunity and the ability of the organism to purify itself

Additionally
You can additionally pour a few drops of lemon, orange, tangerine, juniper or lavender oil. If you prefer to use a couple of oils first you’ll need to mix them and add the honey afterwards. by Nevyan Neykov

---

2 column blogger template - simple white

Easy to install clean white 2 column template for Blogger.
Here are some of its features:

• allows AdSense integration
  
  
• has sitemap
  
  
• optimized, not causing duplicate content
  
  
• uses legible fonts
  
  
• contrast color scheme
  

preview:


How to install it 5 steps(detailed):

1. Open Blogger Dashboard and go to Layout -> Edit Html
   
   
2. Backup your old template by pressing the Download Full Template link.
   
   
3. Download and save the new template from here. Then press the button Browse, load it in the 'Upload a template from a file on your hard drive' field and press Upload.
   
   
4. Next check Expand Widget Templates and change all "yourwebsite.com" items with your blog address.
   
   
5. Congratulations. Now you can see and use your new template!
   
   

If you have any further questions please ask. by Nevyan Neykov

---

How to do an easy windows reinstall

Next are few simple steps on how to complete a fresh windows installation.
Time: from 15 to 45 minutes depending on your computer speed.

1. Provide yourself with Windows CD .
2. Enter BIOS (immediately after restart press several times ESC, F1 or DEL keys). Search all the menus and find First Boot Device, Boot loader or Boot sequence. Change the settings so that your CD to be on first position and the other devices to follow. Exit BIOS saving the changes.
3. If succeeded you'll see the following message: "Press any key to boot from CD..." Press any key to begin loading from the CD drive.
4. Next press consecutively ENTER, F8, ESC. A menu will show to choose where do you want to install your new Windows (if the drive is partitioned you'll see C: and D:) Choose a preferred destination and press ENTER.
5. If you want to save the current information on your drive choose: "Leave the current file system intact (no change)" and press ENTER. Otherwise choose "Format the partition using the NTFS file system", ENTER and press F.
6. Unless you want to set the country, time and date settings press NEXT 3 times.
7. Happy new Windows installation!

Laptop users
Sometimes problems appear when the Windows installation could not recognize the laptop's hard drive. Here is a solution to that: after restart open Bios setup with continuously holding the keys F1, F2, F10, Esc or Del to access BIOS settings. Then go to System Configuration and Disable the SATA Native Mode. Save the changes and restart again. Then you could normally continue you Windows installation. For more information on the subject please read:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00758841&dlc=en&lc=en&cc=us

When problems appear
If you sill experience problems i.e. the new installation fails to start or hangs, that indicates a conflict between your installed software or drivers and the Windows version. In such case enter in Safe Mode and run Start->Run->msconfig. Look through the startup programs and remove the unneeded. Restart. If windows still hangs again in Safe mode from Control Panel->System->Hardware->Device Manager delete the installed drives and hardware devices one by one. The reason behind this is that some new Windows versions are incompatible with older device drivers. When you succeed go to the device manufacturer's website and download appropriate drivers that will work without problems.

Protect your fresh installation with Xpy
http://code.google.com/p/xpy/ a free project that closes standard security holes found in every fresh Windows installation that could be exploited by hackers or spyware.
It works by automatically disabling unneeded services, hardening your system security settings. This way you'll enjoy improved privacy settings. Next to every action suggested by the program you'll find usable description of the threat that will be fixed. Try it carefully: though this software might increase your system performance it alters the standard windows components. by Nevyan Neykov

---